Appendix C

Adding Memory to Your PC Compatibility Card

Your PC Compatibility Card comes with RAM (random-access memory) already installed. You can increase the memory available to the card by installing a DIMM (dual inline memory module) in the DIMM socket. Memory you add to the card is for the exclusive use of your PC operating system and may improve the performance of your PC software.

The DIMM socket accepts an 8, 16, 32, or 64 MB 60 ns, 5-volt DIMM. You may use either EDO or fast-page mode memory.

WARNING The installation of the memory is technically complex. Unless you are comfortable installing components inside computers, Apple recommends that you have memory added by your Apple- authorized dealer (who may charge a fee). If you attempt to add memory yourself, any damage you may cause to your equipment will not be covered by the limited warranty on your computer.

Do not attempt to remove the card, add memory, install the card, or connect the cables without first reading this manual.

127

Page 127
Image 127
Apple 4400, 7300 manual Appendix C Adding Memory to Your PC Compatibility Card