Apple 7300, 4400 manual Windows 95 will install all the necessary network components

Installing protocols for use with Network Driver Interface Specification (NDIS) 2.0

1

2

3

4

5

6

Installing NetBEUI and IPX/SPX in Windows 95

This section describes how to set up the NetBEUI and IPX/SPX protocols for use with an NDIS driver in Windows 95. If you are using ODI, refer to this topic in “Installing Protocols for Use With Open Data-Link Interface (ODI)” earlier in this appendix.

In Windows 95, click Start, choose Settings, and then choose Control Panel.

Double-click the Network icon to open it.

Select Add; then select Adapter.

Select Have Disk.

Insert the floppy disk containing the NDIS 2.0 driver. Verify the drive; then click OK.

You see the message “PC Card Network Driver (NDIS2).” Click OK.

The following network items will be automatically installed:

mClient for Microsoft Networks

mClient for NetWare Networks

mPC Card Network Driver (NDIS2)

mIPX/SPX-compatible Protocol

mNetBEUI

7Choose any custom settings you need (for example, enable file sharing).

8Select Identification. Fill in the boxes labeled “Computer Name,” “Workgroups,” and “Computer Description.” Then click OK.

9Insert the Windows 95 CD when prompted to do so.

Windows 95 will install all the necessary network components.

10Go to “Running the Network Protocol Setup (SETNET) Utility” near the end of this appendix and follow the instructions there. Then return to this section.

140 Appendix D