There are several steps to installing your PC Compatibility Card software:

minstalling the Mac OS software

mcreating a storage area (called a drive container) for your PC software

minstalling Windows 95

minstalling support software for Windows 95

minstalling PC utilities

Installing the Mac OS PC Compatibility software

To install the Mac OS software for operating your PC Compatibility Card, follow these steps:

1Insert the PC Compatibility CardMac OS Software CD into the CD-ROM drive.

If necessary, double-click the CD icon to open it.

2Double-click the PC Compatibility Software folder to open it.

3Double-click the Installer icon in the PC Compatibility Software folder.

If you see a message describing the Installer software, click OK. The Installer window appears.

4Make sure the disk named in the box is the one on which you want to install software.

If not, click Switch Disk until the correct disk name appears.

Note: If you want to install only specific components, choose Custom Install from the Easy Install menu. In the Custom Install window, click to place an X in the boxes next to the components you want to install.

5Click Install.

The software is automatically installed on your hard disk.

14Chapter 2

Page 14
Image 14
Apple 7300, 4400 Installing the Mac OS PC Compatibility software, Software is automatically installed on your hard disk