3 Select the desired page size and click OK.

1

2

3

Any attributes you set in the Page Setup dialog box within the PC Print Spooler will remain in effect until you reset them or select the Default Prefs button in the Preferences dialog box.

IMPORTANT You must set the page size in the DOS or Windows application you are printing from to the same size you selected in the Page Setup dialog box in PC Print Spooler. If you do not do this, your documents may not print properly.

Note: This feature is only available for Epson emulation printing. For PostScript and printer-specific printing, set the page attributes within the DOS or Windows application you are printing from. If “Allow DOS Text Printing” is selected for PostScript printers, you can adjust the page attributes for a PostScript printer, but these settings will only take effect when you are printing from the DOS prompt or a DOS application that does not send PostScript to the printer.

Resetting the default printing preferences

Open the PC Print Spooler.

Choose Preferences from the File menu.

Click Default Prefs to restore the default settings in the Preferences dialog box.

This sets the printing option to PostScript, sets the default font to Courier, and resets the page setup attributes to their default state (as defined by the printer driver selected in the Chooser).

Printing problems

If there is a printing problem, the file you’re trying to print is moved to the Spooler Rejected folder (in the Preferences folder inside the System Folder). This might happen if, for example, you try to print a PostScript file with Epson selected in the PC Print Spooler Preferences.

After setting your preferences correctly, you can print the file automatically by moving the PC Spooler file from the Spooler Rejected folder to the Spooler folder. Or you can try switching to the PC environment and printing again.

38Chapter 3

Page 38
Image 38
Apple 7300, 4400 manual Resetting the default printing preferences, Select the desired page size and click OK