Apple 4400, 7300 manual Make sure the Dimm is snapped into place on both ends

3 Push the DIMM into the DIMM slot until the lever snaps into the closed position.

The DIMM is designed to fit into the socket only one way. Be sure to align the notches in the DIMM with the small ribs inside the socket. With the ejector in the open position (as shown), push the DIMM

into the socket until it snaps into place. The ejector will automatically close.

Ribs (inside socket)

Ejector (The ejector should be pushed outward to be in the open position, as shown.)

DIMM socket

Notches

DIMM (The number of components and their arrangement on your DIMM may vary.)

4 Make sure the DIMM is snapped into place on both ends.

Make sure the DIMM is properly seated by pressing firmly on both ends.

When in the closed position, the ejector should engage the small semiround indentation on the side of the DIMM.

Adding Memory to Your PC Compatibility Card 131