Apple 4400, 7300 manual Protocol.Ini

WARNING You must run SETNET every time you add or remove a network protocol, install or upgrade network software, or change anything in the network control panel. If you do not run SETNET, you will experience network problems.

11After running SETNET, make sure your PROTOCOL.INI file contains the following:

PROTOCOL.INI

[NDISHLP$]

DRIVERNAME=NDISHLP$ BINDINGS=MACNDIS$

[PROTMAN$]

DRIVERNAME=PROTMAN$ PRIORITY=NDISHLP$

[DATA]

VERSION=V4.00.950

NETCARDS=MACNDIS$,MACNDIS

[NETBEUI$]

DRIVERNAME=NETBEUI$ LANABASE=0 SESSIONS=10 NCBS=12

BINDINGS=MACNDIS$

[NWLINK$]

DRIVERNAME=NWLINK$ FRAME_TYPE=4

CACHESIZE=0 BINDINGS=MACNDIS$

[MACNDIS$]

DRIVERNAME=MACNDIS$ PROTOCOLDOT2="F0,E0,FF"

12Shut down Windows 95.

13Switch to the Mac OS by pressing x-Return.

14Click Restart PC in the PC Setup control panel.

Installing Network Client Software 141