
Appendix D
Installing Network Client Software
The PC Compatibility Card supports network drivers that conform to Novell’s Open
Use this appendix as a supplement to the documentation that came with your network software. If your configuration still doesn’t work after following the instructions in this appendix, contact the manufacturer of your network software.
Throughout the process of installing network software, remember the four following items:
mYou must run SETNET every time you add or remove a network protocol, install or upgrade network software, or change anything in the network control panel. If you do not run SETNET, you will experience network problems.
mWhen you install a NetWare client, install it under the NWCLIENT directory. Otherwise, the SETNET program will not work with ODI and your networking software will not work correctly.
mUse the MACODI.COM and MACNDIS.DOS driver found on the PC Compatibility
mWhen using the MACODI.COM driver, use the latest LSL driver (2.21 or later), available from the Novell Web site at http://www.novell.com.
133