Assembly
Unlocking the Slide Carriage
Loosen the slide carriage lock knob (A).
When transporting or storing the miter saw, the slide carriage (B) should always be locked in position.
Releasing the Cutting Head
When not in use, lock the cutting head in the down position. Failure to comply can cause serious injury or damage equipment.
Unlocking
1.Push down on the switch handle (page 10).
2.Pull out the
3.Raise the cutting head to the up position.
Locking
Note: When not in use, lock the cutting head in the down position.
1.Push the cutting head down
2.Press the
Important: Always use the carrying handles when lifting or moving to avoid damage to the machine.
Figure 1
Figure 2
Installing the Dust Bag
1.Squeeze the metal collar wings (B, Fig. 3) of the dust bag (A, Fig. 3).
2.Place the dust bag neck opening around the exhaust port (C, Fig. 3), and release the collar wings (B).
To empty the dust bag, remove from exhaust port, |
| |
open zipper on underside of bag and empty into |
| |
waste container. |
| |
Note: Check and empty bag frequently. Do not wait | Fif | |
for it to get full. | ||
Figure 3 |
12