Manuals / Jet Tools / Kitchen Appliance / Kitchen Utensil

Jet Tools JMS-12SCMS manual Right Bevel Positive Stop Adjustment, Left & Right Bevel Adjustment

Models: JMS-12SCMS

1 40
Download 40 pages 17.86 Kb
Page 17
Image 17

2.Loosen the bevel lock handle (A, Fig. 8) and tilt the cutting arm completely to the left (Figure 11).

3.Using a combination square, check to see if the blade is 45° to the table.

4.To adjust, tilt the cutting arm to zero degrees, loosen the lock nut (B, Fig. 12) and turn the stop bolt (A, Fig. 12) in or out accordingly.

5.Tilt the cutting arm back to the left and recheck alignment.

6.Repeat steps 1–4 if necessary until the blade is 45° to the table, then tighten the lock nut (B, Fig. 12) to secure the stop bolt (A, Fig. 12).

45° Right Bevel Positive Stop Adjustment

1.Set the miter angle to zero degrees. Fully extend the sliding fence completely to the right then pull the bevel detent pin (E, Fig. 12) out.

Note: When retracting the bevel detent pin, it may be required to slightly shift the upper arm assembly right or left.

2.Loosen the bevel lock handle (A, Fig. 8) and tilt the cutting arm completely to the right (Figure 13).

3.Using a combination square, check to see if the blade is 45° to the table.

4.To adjust, tilt the cutting arm to zero degrees, loosen the locknut (D, Fig. 12) and turn the stop bolt (C, Fig. 12) in or out accordingly.

5.Tilt the cutting arm back to the right and recheck alignment.

6.Repeat steps 1–4 if necessary until the blade is 45° to the table, then tighten the lock nut (D, Fig. 12) to secure the stop bolt (C, Fig. 12).

33.9° Left & Right Bevel Adjustment

1.Set the miter angle to zero degree. Fully extend both sliding fences.

2.Loosen the bevel lock handle (A, Fig. 8).

3.Tilt the cutting arm to the 33.9° left bevel position and engage the positive stop by pushing the bevel detent pin (E, Fig. 12) in.

4.Using a combination square, check to see if the blade is 33.9° to the table.

5.To adjust, turn the setscrew (A, Fig. 14) in or out with a 6mm hex wrench until the blade is 33.9° to the table.

6.Repeat steps for the right bevel 33.9º bevel adjustment, making adjustments to setscrew B, Fig. 15.

17

Figure 12

Figure 13

Figure 14

Figure 15

Page 16 Page 18
Page 17
Image 17
Jet Tools JMS-12SCMS manual Right Bevel Positive Stop Adjustment, Left & Right Bevel Adjustment
Page 16 Page 18

JMS-12SCMS specifications

The Jet Tools JMS-12SCMS is a standout in the world of sliding compound miter saws, designed specifically for professionals and serious hobbyists alike. This sophisticated tool combines power, precision, and versatility, making it an essential addition to any workshop.

At the heart of the JMS-12SCMS is its robust motor, which delivers an impressive 15 amps of power. This strength allows it to handle a wide variety of materials, from hardwoods to softer composites, making it ideal for intricate cuts and heavy-duty applications. With a maximum cutting capacity of 12 inches, the JMS-12SCMS can effortlessly slice through larger workpieces with ease, providing the kind of versatility that woodworkers crave.

One of the primary features of the jet saw is its innovative sliding mechanism. This sliding arm design allows for expanded cutting capacity, so users can achieve precise crosscuts and bevels without the need for additional tools. The smooth glide feature ensures that the saw moves effortlessly along its track, significantly reducing friction and wear.

The JMS-12SCMS also boasts a dual bevel capability, allowing for bevel cuts up to 45 degrees left and right. This feature is particularly useful for complex projects that require intricate angles, giving users the flexibility to make precise adjustments without having to flip the workpiece. Additionally, the miter angle can be adjusted to a range of 60 degrees to the right and 52 degrees to the left, providing a comprehensive cutting range for any project.

For enhanced accuracy, this tool includes an easy-to-read digital display for miter and bevel angles, allowing users to set their cuts with confidence. The built-in laser guide further aids in precision, ensuring that every cut is exactly where it's needed.

Safety is always a priority, and the JMS-12SCMS incorporates several features to keep users protected. The saw’s blade guard effectively shields users from accidental contact with the blade, while the electric brake stops the blade quickly after the trigger is released, minimizing the risk of injury.

In conclusion, the Jet Tools JMS-12SCMS is an exceptional tool that combines robust power, innovative features, and a focus on safety. Its advanced technologies and user-friendly design make it a top choice for those seeking reliability and precision in their woodworking projects. Whether you're a professional contractor or a dedicated DIY enthusiast, the JMS-12SCMS will undoubtedly exceed your expectations.