Using the loopback cable

Your PC Compatibility Card came with a loopback cable. It has three connectors: middle, long, and short. No matter how you connect your monitors, these connectors always attach to the same ports:

mThe middle connector attaches to the port on your PC Compatibility Card; this is the port that lets you see the PC environment.

mThe long connector attaches to either your computer’s built-in monitor port, or to a video card (you may leave this end disconnected if you are using two monitors).

mThe short connector attaches to your monitor cable.

This connector (“short connector”)

attaches to your monitor cable.

This connector

This connector (“long connector”)

(“middle connector”)

attaches to either your computer’s built-in

attaches to the

monitor port or video card. It is usually left

PC Compatibility Card.

disconnected if you are using two monitors.

2Chapter 1

Page 2
Image 2
Apple 7300, 4400 manual Using the loopback cable