Apple 7300, 4400 manual Installing NetBEUI and IPX/SPX in Windows, Installing Client 32 for Windows

Installing NetBEUI and IPX/SPX in Windows 95

NetBEUI and IPX/SPX are automatically installed as part of the standard NetWare client software version 1.02 installation. Refer to the section “Installing NetWare Client Software Version 1.02 for Windows 95,” earlier in this appendix.

Installing Client 32 for Windows 95

This section describes how to install Client 32 for Windows 95. Client 32 is installed on top of the existing NetWare version 1.02.

1 Install NetWare Client version 1.02 for Windows 95.

2

3

4

To install NetWare version 1.02 for Windows 95, follow the steps in the section “Installing NetWare Client Software Version 1.02 for Windows 95,” earlier in this appendix.

Follow the onscreen instructions.

When prompted for a driver, select “Existing ODI Driver.”

When installation is complete, restart Windows 95.

Installing TCP/IP in Windows 95

This section describes how to install the TCP/IP protocol for use with an ODI driver in Windows 95. If you are using NDIS 2.0, refer to this topic in “Installing Protocols for Use With Network Driver Interface Specification (NDIS) 2.0,” later in this appendix.

1 Install the NetWare client software.

2

3

4

5

For more information, see the appropriate section on installing NetWare client software earlier in this appendix.

In Windows 95, click the Start button, choose Settings, and then choose Control Panel. Double-click the Network icon in the Control Panel.

Click Add in the Network Configuration dialog box.

Select Adapter Component from the Network Component list and click Add.

138 Appendix D