Apple 4400, 7300 manual 143

11Refer to “Running the Network Protocol Setup (SETNET) Utility,” next, and follow the instructions there.

WARNING You must run SETNET every time you add or remove a network protocol, install or upgrade network software, or change anything in the network control panel. If you do not run SETNET, you will experience network problems.

12After running SETNET, make sure your PROTOCOL.INI file contains the following (assuming TCP/IP is the only loaded protocol):

PROTOCOL.INI

[ndishlp$] DriverName=ndishlp$ Bindings=MacNDIS$

[protman$] DriverName=protman$ priority=ndishlp$

[data]

version=v4.00.950 netcards=MacNDIS$,MacNDIS

[MacNDIS$] DriverName=MacNDIS$ ProtocolDIX=”800,806,8035”

13Shut down Windows 95.

14Switch to the Mac OS by pressing x-Return.

15Click Restart PC in the PC Setup control panel.

Installing Network Client Software 143