Quick Start Guide
Airborne Direct Ethernet Adapter
ABDG-ET-DP501/IN5010
Revision v2.1
February 2011
Document Number:
Kit Contents:
Upon receiving the kit please check that you received the following:
∙
∙5VDC Power Supply (2.1mm barrel jack) o included with
o optional for
∙2dBi, 2.4Ghz 50 ohm,
∙Quick Start Guide
∙Airborne Direct software and documentation CD
If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at (800)
What you will need:
To evaluate the unit you will need the following components and facilities:
∙
∙Laptop or desktop system with an Ethernet port.
∙Power outlet for
∙802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must be known. Required information will include:
o SSID (Wireless network name).
o Security settings (WEP, WPA, WPA2, etc.).
o Security credentials (passphrase, key or certificates).
o Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network.
∙A web browser on the laptop top or desktop (Internet Explorer, Firefox, Opera and Chrome v4.0 are supported).
