Quatech IN5010 Express Setup Configuration Page, Express Setup Page, Express Page Setup, Step

AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc.

Express Setup Configuration Page

When the devices web interface is accessed for the first time an Express Setup page will be shown. This page is designed to allow a quick device set-up by presenting the most popular device configuration options in a single location. For more advanced configurations the full set of options are available in the feature links (left-hand column).

The Express Setup web page will display the necessary fields based upon the selections made during configuration. The Express Setup page looks like (Figure 1):

Figure 1 - Express Setup Page

To configure the device for operation each field must be configured correctly. The following steps should be taken to configure the device (Note: not all fields will be visible):

Table 1 - Express Page Setup

Step	Description
Navigation Bar	You will see a group of fields under the banner of WLAN
Select Configuration	Parameters.
Feature Link	This step is optional. If this is the first time the device has been
Select Express Setup	configured this page will automatically be displayed.
Select Discovery OEM Device Name	This parameter allows you to name the device uniquely or
	group into a functional set. When device discovery is used this
	name identifies the found device.
	If you wanted to uniquely identify the device you could mark it
	with a label e.g. Dev1, and then enter Dev1 in this field. When
	the device is found it will identify itself as Dev1.
	Alternately you could indicate the type of equipment the device
	is attached to e.g. Haas TL-2 (CNC Turning Center), by giving
	the unit a name like Haas_TL_2. When discovered you can then
	identify the device you are accessing.
	Enter the text string is you wish to change the default value.
	This field is optional.
Select Radio Startup Mode	Select On from the drop down menu for the radio to operate.

940-0193-210 4 February 2011