Manuals / Quatech / Computer Equipment / Network Card

Quatech SSP-200, SSP-300 user manual Option

Models: SSP-300 SSP-200

1 53

Download 53 pages 14.66 Kb

Page 10

Option

Option	Port Output Driver
o0	Always Enabled
o1	DTR Controlled
o2	RTS Controlled
o3	Auto-Toggle

Figure 0. DOS Client Output Enable Options.

Hinstructs the client driver to enable the RTS-CTS modem control handshake on the RS-422/485 port. When modem control handshaking in enabled, the 16C750 UART’s RTS and CTS signals are connected to the RS-422/485 auxiliary channel. The auxiliary channel may then be used for handshaking between the SSP-200/300’s port and a peripheral device. When modem control handshaking is disabled, the RTS and CTS signals from the 16C750 UART are looped back to each other. If this option is omitted, the default setting is RTS-CTS modem control handshake disabled. See the Hardware Information section for more information.

2.1.2.1 Example 1

DEVICE = C:\SSP-200\ SSP231CL.SYS

In example 1, no command line arguments are specified. The Client Driver will configure a SSP-200/300 inserted into any socket with a base address and IRQ assigned by Card and Socket Services. The SSP-200/300 RS-422/485 output drivers will always be enabled, and RTS-CTS modem control handshaking will be disabled.

2.1.2.2 Example 2

DEVICE = C:\SSP-200\SSP231CL.SYS (b290,i11)

In example 2, a single command line argument is provided. The Client Driver will attempt to configure a SSP-200/300 inserted into any socket with a base address of 290H and IRQ 11. If address 290H or IRQ 11 is unavailable, the SSP-200/300 will not be configured. If the Client Driver can successfully configure the SSP-200/300unit, the RS-422/485 output drivers will always be enabled, and RTS-CTS modem control handshaking will be disabled.

2-5	SSP-200/300 (Rev. I and later) User's Manual

Image 10

Quatech SSP-200, SSP-300 user manual Option

Contents

Single Channel RS-422/485 PCMCIA Asynchronous Adapter SSP-200/300Users Manual INTERFACE CARDS FOR IBM PC/AT AND PS/2Quatech, Inc Warranty InformationSSP-200/300 Manufacturers Name Standards to whichDeclaration of Conformity Manufacturers AddressTable of Contents PCMCIA Card 1. IntroductionStandard D-9 Female This page intentionally left blank SSP-200/300 Rev. I and later Users ManualClient Driver recommended 2. DOS/WindowsEnabler File type DOS device driver2.1 SSP-200/300 Client Driver for DOS 2.1.1 Client Driver Installationdrive \path \ Iirq 2.1.2 Command Line OptionsBaddress SsocketOption 2.1.2.5 Example DEVICE = C\SSP-200\SSP231CL.SYS b300,i5 2.1.2.3 Example DEVICE = C\SSP-200\SSP231CL.SYSs0,b300,i5,o22.1.2.4 Example DEVICE = C\SSP-200\SSP231CL.SYSi5,h,b300 DOS/Windows2.1.3 Common Problems Generic Client DriversOlder Versions of Card and Socket Services 2.2 SSP-200/300 Enabler for DOSMultiple Configuration Attempts Available ResourcesBaddress 2.2.1 Command Line OptionsIirq Figure 0. DOS Enabler Output Enable Options 2.2.1.1 Example 1 SSP231EN.EXE Memory Range Exclusion 2.2.2 Common ProblemsCard and Socket Services Software Socket NumbersSSP-200/300 Rev. I and later Users Manual 2-133.2 SSP-200/300 Resource Settings in Windows 95/98/ME 3.1 Installing a SSP-200/300 Under Windows 95/98/ME3. Windows 95/98/Millennium ME 1. Start the Windows 95/98/ME Device Manager 3.2.1Viewing Resource Settings with Device Manager3.2.2Changing Resource Settings with Device Manager PC CardWindows 95/98/Millennium ME SSP-200/300 Rev. I and later Users Manual Basic Configuration List Not Available 3.3 Frequently Asked QuestionsBase I/O Address Resource Modification Not Allowed This page intentionally left blank SSP-200/300 Rev. I and later Users Manual4.1 Installing a SSP-200/300 Under Windows 4 Windows4. Double click ‘Serial Port Adapters’ 5. Double click ‘Drivers’ SSP-200/300 Rev. I and later Users Manual7. Click on ‘qserbrd’ and select open 6. Double click on ‘Windows 2000, XP, for PCI, PCMCIA, ISA’Windows 4.2 SSP-200/300 Resource Settings in Windows ManagerPCMCIA Serial Port which is listed under the hardware class Ports COM Windows4.2.1 Viewing Resource Settings with Device Manager 4.2.2 Changing Resource Settings with Device Manager SSP-200/300 Rev. I and later Users Manual The X1 clock mode mimics a standard COM port Clock ModeAuto clock mode enables applications to request The X2 clock mode locks the ports hardwareSSP-200/300 Rev. I and later Users Manual 4-11RTS is set to enable the transmitters Used in two-wire communication RS-422/485 Connector SetupRS-422/485 Duplex Mode DTR is set to enable the transmitters Used in two-wire communicationSSP-200/300 Rev. I and later Users Manual Windows 4-14SSP-200/300 Rev. I and later Users Manual 5.1 Installing SSP-200/300 5 Windows NTDevice Manager Icon on Desktop SSP-200/300 Rev. I and later Users Manual3. Follow the steps for the ‘Add Quatech Hardware Wizard’ Windows NTAdditional help is available online 6. Hardware Information 6.1 Auxiliary Channel Configuration6.1.1 Auxiliary Channel RTS-CTS Handshaking 6.1.2 Auxiliary Channel Handshaking Disabled 3 Options 6.2 Half Duplex OperationOutput Enable Active LowSSP-200/300 Rev. I and later Users Manual 6.3 Termination Resistors Recommended Termination Resistor ValuesThis page intentionally left blank SSP-200/300 Rev. I and later Users Manual7. External Connections Standard D-9 FemaleThis page intentionally left blank SSP-200/300 Rev. I and later Users ManualPower Requirements 8. SpecificationsPhysical Dimensions ConnectorSSP-200/300 Users Manual Revision May Quatech, IncSSP-200/300 Rev. I and later Users Manual