Quatech USBN-500 user manual Upgrade

a)Thread Status: Thread Session Host Action

b)Service Status: Service Status Control

c)Device Status: Vendor Id Product Id Class Id Peer-IP address Status

This status page is updated automatically every 10 seconds and it shows the device connected to the USB device server.

The Device Status table shows the Vendor Id, Product Id, Class, Peer-IP and the Status of the Device connected. The Peer-IP is the IP Address of the computer on which the device is currently accessed. Whenever any Device is Busy the Status of that device changes to “BUSY” and whenever it is not being used it changes to “FREE” as shown below.

3.5. Upgrade page.

The Upgrade page allows you to upgrade the firmware.

Select the file to be upgraded by click on the Browse option on the Upgrade page as shown below.