![](/images/new-backgrounds/1107062/10706283x1.webp)
Airborne Control Center
Wireless Security Settings
Wireless Security Mode | Enables or disables wireless security: | ||
| • | Disable | – Disable any security (default) |
| • | WEP64 | – |
|
|
| characters) |
| • | WEP128 | – |
|
|
| characters) |
| • | - WPA with preshared key. | |
|
|
| Requires preshared key |
| • | - WPA with 802.1x (LEAP) | |
|
|
| authentication. Requires LEAP |
|
|
| username and password |
| • |
| - WPA with 802.1x (LEAP) |
|
|
| authentication, and using "WPA |
|
|
| Migration Mode" (static |
|
|
| key is used for broadcast and |
|
|
| multicast traffic) |
| • | ||
|
|
| authentication, and using "WPA |
|
|
| Migration Mode" (static |
|
|
| key is used for broadcast and |
|
|
| multicast traffic) |
| • |
| - WPA with preshared key, and |
|
|
| using "WPA Migration Mode" (static |
|
|
| |
|
|
| and multicast traffic) Requires |
|
|
| preshared key. |
| • |
| - WPA with preshared key, and |
|
|
| using "WPA Migration Mode" (static |
|
|
| |
|
|
| and multicast traffic) Requires |
|
|
| preshared key. |
WPA Passphrase (Preshared | Configures the | ||
Key) | The input range is 8 to 63 ASCII characters or 64 hex | ||
| characters. This key must match the key on the AP. | ||
LEAP Username | Configures the | ||
| The LEAP username [1 to 32 characters] must match the | ||
| LEAP username assigned on the LEAP server. The LEAP | ||
| username cannot contain spaces. | ||
|
|
|
|
Page 36 | AirborneDirect™ Ethernet Bridge User's Guide |