Rackmount Solutions Enterprise Series manual Controls And Indicators, English, Front Panel

English

CONTROLS AND INDICATORS

FRONT PANEL

On-Line/On-Battery/Boost/Buck LED

Fault LED

Overload LED

Weak/Bad Battery LED

Site Wiring Fault LED

On/Off/Test Switch

Press and release the ON/OFF/TEST button after one beep to turn the unit ON or OFF (see section 4)

	On-Line	On-Battery	Buck	Boost
	The On-Line/On-Battery/Boost and Buck (green) LED illuminates in a steady
	state when the UPS is on and supplying AC power to the load. The LED blinks
	and the audible alarm sounds, when supplying battery power to the load.
	The Fault (red) LED illuminates when the UPS has detected an internal fault. (see
	section 5)
	The Overload (yellow) LED illuminates when the loads connected to the UPS
	exceeds the UPS power rating. (see section 5)
	The Weak/Bad Battery (red) LED illuminates when the UPS has detected that the
	batteries are Weak/Bad. Battery replacement might be required. (see section 5)
SWF	The Site Wiring Fault (red) LED illuminates when the UPS detects a improperly
	wired AC outlet. (see section 5)

4