mat. PM appears for PM hours when the
3.Repeatedly press (or hold down) HOUR until the correct hour appears.
4.Repeatedly press (or hold down) MINUTE until the correct minute appears.
5.Repeatedly press (or hold down) SEC- OND until the correct second appears.
Note: When you hold down MINUTE or SECOND, the setting advances in incre- ments of 10.
6.Press MODE or wait until the display stops flashing. The clock is now set.
COUNTING UP
Each timer can count up to 29 hours, 59 min- utes and 59 seconds. Then they reset and be- gin counting from 0:00 00 again. You can use the timers separately or together.
1.While CLOCK appears, press MODE.
COUNT UP1, COUNT UP2, and their timers appear.
Note: If either timer does not show 0:00 00, press CLEAR to reset both timers.
2. Press TIMER 1 (for COUNT | UP1) or |
TIMER 2 (for COUNT UP | 2) to start |
counting up. |
|
Note: You can start COUNT UP1 and COUNT UP2 at the same time by press- ing TIMER 1 and TIMER 2 together.
3.Press TIMER 1 or TIMER 2 to stop count- ing up. Press again to continue counting up.
4.When both timers have stopped, press CLEAR to reset them to 0:00 00.
COUNTING DOWN
You can use the two countdown timers for ac- tivities that require a predetermined amount of time, such as baking a cake or playing a game. The timers count down in
Note: The maximum countdown time is 29 hours, 59 minutes and 59 seconds.
1.While CLOCK appears, press MODE twice. TIMER 1 and 0:00 00 appear.
Notes:
•To use TIMER 2, press MODE three times. TIMER 2 appears.
•To use both timers, press MODE four times. TIMER 1 and TIMER 2 appear. Then press TIMER 1 or TIMER 2 to set each timer.
2.Repeatedly press (or hold down) HOUR until the desired hour appears.
3.Repeatedly press (or hold down) MINUTE until the desired minute appears.
4.Repeatedly press (or hold down) SEC- OND until the desired second appears.
Note: When you hold down HOUR, MINUTE, or SECOND, the setting advances in increments of 10.
5.Press TIMER 1 or TIMER 2 to start count- ing down.
Notes:
•Both timers can be run at the same time.
•To pause the countdown before the timer reaches 0:00 00, press TIMER 1 or TIMER 2. To resume the count- down, press the same button again.
2
