NEC NDA-24300 manual When Delete is selected in the Type selection list box

CADSD: Continuous Assignment of Station Data

When Delete is selected in the Type selection list box

Input Data
TN(START):	First Tenant Number
TN(END):	Last Tenant Number
STN(START):	First Station Number [Max. 6 digits]
STN(END):	Last Station Number [Max. 6 digits]
STEP:	Station Count-up Step Note 1
	If using * and # → [1-12]
	If not using * and # → [1-10]

Note 1: In this parameter, specify the size of increment between the consecutive station numbers to be deleted. See the example below:

Example:	Input data
	STN(START)=100
	STN(END)=200
	STEP=10

Buttons

Result

Station Number is deleted by 10 increments:

→∇ When * and # are not used as part of STN

100 110 120 130 ... 190 200

∇When * and # are used as part of STN 10* 118 126 134 ... 1** 1#8

Execute:	Click to delete the input data.
Cancel:	Click to cancel the deletion.
Exit:	Click to exit this command.
Display Data
TN:	Tenant Number
STN:	Station Number
STATUS:	Result of Deletion Note 2

Note 2: When the deletion is successful, OK is displayed here. Otherwise (i.e. the deletion is rejected), related error message is displayed.

NDA-24300CHAPTER 8

Page 529

Issue 1