NEC NDA-24300 manual Line Load Control Indication Deskcon

SYSTEM OPERATIONS

LLC is displayed on a Desk Console, when Line Load Control starts.

LLC

L6	1	2	3
L5
L4	4	5	6
L3
L2	7	8	9
L1

* 0 #

Desk Console

Line Load indication

Figure 6-11 Line Load Control Indication (DESKCON)

(3)Operations on the MAT

By entering ALLC command from the MAT, Line Load Control executes. The station to be controlled and the contents of the Line Load Control executed on the MAT are the same as those in Step (1), Operations on the Attendant Console.

COMMAND

COMMAND FULL NAME

ALLC

Assignment of Line Load Control

(4)Automatic Setting

If the usage rate of the CPU exceeds the system data usage rate, Line Load Control is automatically set. In this case, system message [6-C] displays. The station to be controlled and the contents of the Automatic Line Load Control are the same as those in Step (1), Operations on the Attendant Console.

If the usage rate of the CPU drops below the system data usage rate, the Line Load Control is automati- cally cancelled. In this case, system message [6-D] displays. While the Line Load Control is set, the lamps on the control panel of the Desk/Attendant Console remain lit.

NDA-24300CHAPTER 6

Page 399

Issue 1