NEC NDA-24300 manual ATTCON/DESKCON Check, Attendant Console Check

ROUTINE MAINTENANCE PROCEDURE

2.10 ATTCON/DESKCON Check

(1) Attendant Console Check

START

Ask the operator at each ATTCON if the ATTCON is operating normally.

Each operator presses the LCHK button on the ATTCON and confirms that all the lamps on the control panel light up.

When the ATTCON is equipped with a Time Indicator Section, the operator also checks the displayed time.

END

Note: Adjusting Time Method (see Figure 7-2.)

•If the Hour (H) button is pushed once, the time will advance one hour. (To push the button, use a thin object, such as a toothpick.)

•If the H button is held continuously, the time will advance one hour each second.

•If the Minute (M) button is pushed once, the time will advance one minute.

•If the M button is held continuously, the time will advance one minute each second.

AM	PM	ADJUST.
		H	M
TIME
	STATION/TRUNK NUMBER

Figure 7-2 Adjusting Time on ATTCON

NDA-24300CHAPTER 7

Page 507

Issue 1