NEC NDA-24300 manual Cscl Continuous Change of Station Class

CSCL: Continuous Change of Station Class

CSCL: Continuous Change of Station Class

1.Functional Outline

This command can change the station class information (TEC, RSC, SFC) en bloc by designating the range of the station number.

2.Parameters

Input Data
TN:	Tenant Number
STN(START):	First Station Number [0-9, #, * (Max. 6 digits)]	Note 1
STN(END):	Last Station Number [0-9, #, * (Max. 6 digits)]	Note 1
TEC(OLD):	Telephone Equipment Class before change [1-31]	Note 2, Note 3
TEC(NEW):	Telephone Equipment Class after change [1-31]	Note 2
RSC(OLD):	Route Restriction Class before change [0-15]	Note 3
RSC(NEW):	Route Restriction Class after change [0-15]
SFC(OLD):	Service Feature Class before change [0-15]	Note 3
SFC(NEW):	Service Feature Class after change [0-15]

Note 1: In the bottom part of the display, a check box is provided to determine whether to use "*" and "#" as a part of the Station Number. If necessary, check the box.

Note 2: Details on TEC (Telephone Equipment Class) are shown below:

1=DP (10pps)	2=PB
3=DP/PB	4=DP (20pps)
5-11=Not used	12=Dterm
13=Data Terminal via Dterm	14=Hot Line
15=CAS Line	16=Data Terminal via Data Module
17=Not used	18=Virtual Line Appearance (for Dterm Multi-Line)
19-22=Not used	23=ISDN Terminal
24-26=Not used	27=8 Conference Equipment
28-31=Not used

Note 3: If you want to change all classes of all specified stations, enter “**” for this parameter.

Buttons
Execute:	Click to make the input data valid.
Cancel:	Click to cancel the input data.
Exit:	Click to exit this command.
Display Data
STN:	Station Number
STATUS:	Data Entry Result
	OK=Data Assignment is successful Note

Note: If not OK (i.e. the data entry is not successful), related error message is displayed here.

CHAPTER 8 NDA-24300

Page 546

Issue 1