NEC NDA-24300 manual Program KEY NON Load, System Data KEY NON Load, END ON. on Line

SYSTEM OPERATIONS

Table 6-12 System Initialization Without Loading [Procedure #1]

ACTION				7SEG LED/OPE LAMP/KEY
				SETTINGS
				CPU OPE lamp on the DSP of
START				active CPU lights steadily green.
				IMG0-3 lamps flash.
Confirm system is operating normally.
				IMG0 lamp on the DSP of mate
Turn ON the EFFECT key on the TOPU. (See Figure 6-58)				CPU flashes green.
Set the keys on the TOPU as follows.				SYSTEM DATA
• PROGRAM KEY	→		NON LOAD
				PROGRM
	→
• SYSTEM DATA KEY			NON LOAD	NON LOAD
				LOAD	LOAD
				NON LOAD
Press INITIAL START button on the TOPU.				PZ-DK222
				CPU OPE and IMGX lamps on
				both DSP go OFF.
		• HD Initial		STATUS LED (right) on
				the CPU is ON.
		• System Initialization
				STATUS LED (right) on
		• System starts up again.		the DSP of CPU is ON.
				CPU OPE lamp on the DSP of
				active CPU lights steadily green.
				IMG0-3 lamps flash.
				IMG0 lamp on the DSP of mate
				CPU flashes green.
				STATUS LED (right) on
				the DSP of active CPU is
	END			ON. (ON LINE)

NDA-24300CHAPTER 6

Page 479

Issue 1