NEC NDA-24300 manual Catk Continuous Assignment of Trunk Data, TKEND=21

CATK: Continuous Assignment of Trunk Data

CATK: Continuous Assignment of Trunk Data

1.Functional Outline

This command can assign/delete many trunk data simultaneously which have consecutive numbers.

2.Parameters

Type/KIND Note Note::Assign/Delete

Note: Type

KIND

[When “Assign” is selected in the “Type/KIND” selection list box]

Input Data
RT:	Route Number
TK (START):	First Trunk Number [1-768]
TK (END):	Last Trunk Number [1-768]
STEP:	Trunk Count-up Step [1-10] Note 1
LENS (START):	First Line Equipment Number [6 digits]
LENS (END):	Last Line Equipment Number [6 digits]
TN:	Tenant Number
RSC:	Route Restriction Class [0-15] Note 2
SFC:	Service Feature Class [0-15] Note 2
GROUP (START):	First Group Number [0-31]
GROUP (END):	Last Group Number [0-31]
LEVEL (START):	First Level Number [0-7]
LEVEL (END):	Last Level Number [0-7]
TYPE:	Count-up Type [1-6] Note 3
	1	= LEVEL →		GROUP→		UNIT
	2	= LEVEL →		UNIT	→	GROUP
	3	= GROUP→		UNIT	→	LEVEL
	4	= GROUP→		LEVEL →		UNIT
	5	= UNIT	→	LEVEL →		GROUP
	6	= UNIT	→	GROUP→		LEVEL

Note 1: In the parameter here, specify the size of increment between the consecutive trunk numbers to be as- signed. See the example below:

Example:	Input data
	TK(START)=1
	TK(END)=21
	STEP=2

Result

→Trunk Number is assigned by 2 increments:

1 3 5 7 9 11 ... 19 21

Note 2: Data entry for this parameter is necessary when “RT” is “901” or “915.”

Note 3: “TYPE” parameter here determines how to arrange the trunk data. See [Details on Trunk Arrange- ment “TYPE” ] (later pages) for details.

CHAPTER 8 NDA-24300

Page 532

Issue 1