NEC NDA-24300 manual ➃ Data Load Result after restart, Processing, B15 B11

										SYSTEM MESSAGES
➃ Data Load Result after restart									b0:	0/1 = Office Data Load ->“Normal End”/“Abnormal End”
	processing								b1:	0/1 = Data Load ->“Normal End”/“Abnormal End”
b7		b6	b5	b4	b3	b2	b1	b0	b2:	0/1 = Individual Speed Calling data load is “Normal End”/“Abnormal
										End”
									b3:	0/1 = PS transfer service data load is “Normal End”/“Abnormal End”
									b4:	0/1 = PS Name Display service data load is “Normal End”/“Abnormal
										End”
b15					b11		b9	b8	b5:	0/1 = -/Network DM Load ->“Normal End”/“Abnormal End”
									b6:	0/1 = -/Local DM Load ->“Normal End”/“Abnormal End”
									b7:	0/1 = -/DM Non Load
									b8:	0/1 = User Assign Soft Key data load is “Normal End”/“Abnormal
										End”
									b9:	0/1 = Number Sharing data load is “Normal End”/“Abnormal End”
										Note 2
									b11:	0/1 = Call Block data load is “Normal End”/“Abnormal End”

Note 1: Phase 1 Restart is executed when initializing the system without disrupting the following two-way connections that have already been established:

•Basic two-way connections (STN-STN, STN-TRK, TRK-TRK)

•Fixed connections

•Two-way connections established on a Fusion link

For more details, see Chapter 6, Section 12.2.3.

Note 2: Number sharing data load also affects the data load of Dual Station Calling Over-FCCS.

NDA-24300CHAPTER 3

Page 43

Issue 1