NEC NDA-24300 manual Dlsst Display of Lock Out Station Number Telephone Number, Count

DLSS_T: Display of Lock Out Station – Number – Telephone Number

DLSS_T: Display of Lock Out Station – Number – Telephone Number

1.Functional Outline

This command is used to print out stations in lockout state, by using Telephone Numbers. This command is available at NCN (for Fusion network) only.

2.Parameters

Input Data
TYPE:	Printout of all lockout stations
	Printout of lockout stations by tenant
	Printout of lockout stations within a specified range of station number
UGN:	User Group Number	Note 1, Note 2
Start TELN:	First Telephone Number (max. 16 digits)	Note 2
End TELN:	End Telephone Number (max. 16 digits)	Note 2

Note 1: This parameter is valid when “Type =Printout of lockout stations by tenant” is selected.

Note 2: This parameter is valid when “Type =Printout of lockout stations within a specified range of station number” is selected.

Display Data
FPC:	Fusion Point Code (1-253)
TN:	Tenant Number
Start STN:	First Physical Station Number
	(max. 5 digits for Business/max. 6 digits for Hotel system)
End STN:	End Physical Station Number
	(max. 5 digits for Business/max. 6 digits for Hotel system)
CNT:	Count
UGN:	User Group Number
TELN:	Telephone Number (max. 16 digits)
LENS:	Line Equipment Number
Buttons
Get:	Click to get information on the lockout status.
Exit:	Click to exit this command.

CHAPTER 8 NDA-24300

Page 558

Issue 1