NEC NDA-24300 manual When 9 =05 OAI / 07 MIS, 12 ~ 24 Not used

SYSTEM MESSAGES

[When 9 =05 (OAI) / 07 (MIS) ]

➉Faulty Logical Port No. (Hex)

b7 b6 b5 b4 b3 b2 b1 b0

Error Kind (ERRK)								b0-b7 : Error Kind (Hex)
b7	b6	b5	b4	b3	b2	b1		Refer to Table 3-3:
							b0

Table 3-3 Error Kind (ERRK)

Output Data	Error Situation	Required Check
01H	SEND Execution Error	[1] Check the TCP/IP Transmission
		capacity on the UAP side is proper
	TCP/IP connection is down because the text is not transmit-	or not.
	ted continuously.
		[2] Check the operation status on the UAP
		side is normal.
02H	RECEIVE Execution Error	[1] Check the software operation on the
		MIS or Host side.
	Incorrect text format is received.
		[2] Check the LAN cable connection
		status.
03H	TCP/IP Connection Error	Re-start the MIS or HOST computer.
	TCP/IP connection is released due to the TCP port discon-
	nection order from the MIS or Host.
04H	Connection Error (B-level Infinite Loop, etc.)	Re-check the operation status of MIS or
		Host.
	TCP port is released due to the detection of abnormal state in
	the MIS or HOST operation.
05H	TCP/IP Port Capacity Over	The number of allowed ports for applica-
		tion use via TCP/IP must be 16 or less. Ad-
	TCP/IP connection cannot be established due to the connec-	just the used application number not to
	tion port capacity over.	exceed “16” in total.

12 ~ 24 Not used

NDA-24300CHAPTER 3

Page 227

Issue 1