CMWL: Control Message Waiting Lamp

CMWL: Control Message Waiting Lamp

1.Functional Outline

This command is used to indicate ON/OFF status and to control the Message Waiting Lamp ON/OFF (MW Lamp) at the station. If the station is a Dterm, this command can also be used to control Message Waiting Display on the Dterm.

2.Parameters

Input data

TYPE:

Type of Input (1,2)

 

 

1/2=Designation by Station Number/Designation by LEN

TN:

Note 1

 

STN:

Maximum 5 digits for Business system, and 6 digits for Hotel system. Note 1

LENS:

Note 2

 

MCI:

Message Center MW Status (0,1)

 

 

0/1=OFF/ON

 

ATT:

Attendant Console MW Status (0,1) See the parameter MCI.

STA:

Station MW Status (0,1)

See the parameter MCI.

VMM:

Voice Mail Module MW Status (0,1)See the parameter MCI.

MWLAMP:

MW Lamp Status

 

 

0/1=OFF/ON

 

Note 1: This parameter appears when TYPE= “1.”

Note 2: This parameter appears when TYPE= “2.”

NDA-24300CHAPTER 8

Page 543

Issue 1

Page 570
Image 570
NEC NDA-24300 manual Cmwl Control Message Waiting Lamp