NEC NDA-24300 manual Set the Sense switch at, DM Load Restart on the DSP

SYSTEM OPERATIONS

Table 6-21 Start-Up When Basic, Application Software, and

Office Data Installed [Procedure #2]

	ACTION			7SEG LED/OPE LAMP/KEY
				SETTINGS
➀ When Power is OFF		➁ When Power is ON
		and OFF LINE
START		START
				ATTENTION
				Contents
Set the SENSE switch at “2”		Set the SENSE switch at “2”
				Handling
(DM Load Restart) on the DSP		(DM Load Restart) on the DSP		Static Sensitive
				Precautions Required
of CPU #0.		of active CPU.
Turn ON the SW on the PZ-		Press the CPU RST button
PW92 of CPU #0.		on the DSP of active CPU.
			or
		Turn OFF the SW on the PZ-
		PW92 of active CPU and
		turn it ON again.

• HD Initial	STATUS LED (right) on
	the DSP of CPU is ON.
• Program Load	STATUS LED (right) on
	the DSP of CPU is ON.
• Office Data Load	STATUS LED (right) on
	the DSP of CPU is ON.
• System Initial	STATUS LED (right) on
	the DSP of CPU is ON.

A

CHAPTER 6 NDA-24300

Page 492

Issue 1