NEC NDA-24300 manual When Delete is selected in the Type/KIND selection list box, Tkstart, Tkend

CATK: Continuous Assignment of Trunk Data

[When “Delete” is selected in the “Type/KIND” selection list box]

Input Data
RT:	Route Number
TK(START):	First Trunk Number [1-768]
TK(END):	Last Trunk Number [1-768]
STEP:	Trunk Count-up Step [1-10] Note 1
Buttons
Execute:	Click to delete the input data.
Cancel:	Click to cancel the deletion.
Exit:	Click to exit this command.
Display Data
TK:	Trunk Number
STATUS:	Result of Deletion
	OK=Deletion Success Note 2

Note 1: In the parameter here, specify the size of increment between the consecutive trunk numbers to be de- leted. See the example below:

Example:	Input data
	TK(START)=1
	TK(END)=21
	STEP=2

Result

→Trunk Number is deleted by 2 increments:

1 3 5 7 9 11 ... 19 21

Note 2: When the deletion is successful, “OK” is displayed here. Otherwise (i.e. the deletion is rejected), re- lated error message is displayed.

CHAPTER 8 NDA-24300

Page 534

Issue 1