NEC NDA-24300 manual Cstn Continuous Change of Station Number

Click to make the input data valid. Click to cancel the input data Click to exit this command.

Station Number before change Station Number after change Data Entry Result

OK=Data Assignment is successful Note

CSTN: Continuous Change of Station Number

CSTN: Continuous Change of Station Number

1.Functional Outline

This command can change the consecutive station numbers en bloc by designating the station number range.

2.Parameters

Input Data

TN:	Tenant Number
OLD STN(START):	First Station Number before change [0-9, #, * (Max. 6 digits)]	Note
OLD STN(END):	Last Station Number before change [0-9, #, * (Max. 6 digits)]	Note
NEW STN(START):	First Station Number after change [0-9, #, * (Max. 6 digits)]	Note
NEW STN(END):	Last Station Number after change [0-9, #, * (Max. 6 digits)]	Note

Note: In the bottom part of the display, a check box is provided to determine whether to use “*” and “#” as a part of the Station Number. If necessary, check the box.

Buttons

Execute:

Cancel:

Exit:

Display Data

OLD STN:

NEW STN:

STATUS:

Note: If not OK (i.e. the data entry is not successful), related error message is displayed here.

NDA-24300CHAPTER 8

Page 547

Issue 1