SYSTEM MAINTENANCE OUTLINE

STEP 5 Perform the work indicated by (8), and if the result of the work is the same as the status indi- cated, the fault is indicated by (9). If the fault repair work indicated by (9) affects another nor- mal line, recheck the work as indicated by (10).

(b)Fault Repair Procedure

A fault repair procedure is explained by means of “TREE” format in Chapter 5. The following ex- plains how to follow the “TREE” format and proceed with designated work. See Figure 2-25.

Begin from START and proceed with the necessary repair work following the sequence.

When a faulty circuit card (or circuit cards) is suspected, replace the faulty circuit card with a spare in accordance with the work procedure pertaining to that specific circuit card.

STEP 1 Replace the circuit card indicated by (A) with a spare and check it. Perform the detailed work as per (B). If the fault status is beyond repair, proceed to the next step.

STEP 2 If the range of the fault or the system configuration is as indicated by (C), perform a check as indicated by (D). If the fault status is beyond repair, proceed to the next step.

STEP 3 Replace the circuit card indicated by (E) with a spare and check it. The detailed procedure in- dicated by (G) varies with the system configuration indicated by (F).

NDA-24300CHAPTER 2

Page 31

Issue 1

Page 58
Image 58
NEC NDA-24300 manual System Maintenance Outline