NEC NDA-24300 manual Active CPU light steadily green, System Data KEY → NON Load

			SYSTEM OPERATIONS
Table 6-16	System Initialization by Phase 1 Restart [Procedure #5]
	ACTION		7SEG LED/OPE LAMP/KEY
			SETTINGS
			CPU OPE lamp on the DSP of
	START		active CPU light steadily green.
			(IMG0-3 lamps flash.)
Confirm system is operating normally.
			IMG0 lamp on the DSP of mate
Set the SENSE switch on the DSP of CPR to “3”.
			CPU flashes green.
Turn ON the EFFECT key on the TOPU. (See Figure 6-58)
			SYSTEM DATA
			PROGRM
Set the keys on the TOPU as follows.
			NON LOAD
			LOAD
• PROGRAM KEY	→	NON LOAD		LOAD
• SYSTEM DATA KEY →		NON LOAD	NON LOAD
			PZ-DK222
Press INITIAL START button on the TOPU.			CPU OPE and IMGX lamps on
			both DSP go OFF.
		• HD Initialization	STATUS LED (right) on
			the CPU is ON.
		• System Initialization	STATUS LED (right) on
		• System starts up again.	the DSP of CPU is ON.
			CPU OPE lamp on the DSP of
			active CPU lights steady green.
			(IMG0-3 lamps flash.)
			IMG0 lamp on the DSP of mate
			CPU flashes green.
			STATUS LED (right) on
			the DSP of active CPU
			is ON. (ON LINE)
	END

NDA-24300CHAPTER 6

Page 483

Issue 1