NEC NDA-24300 manual Class Change and Number Change of Station and Data Terminal

SYSTEM OPERATIONS

6.2Class Change and Number Change of Station and Data Terminal

Figure 6-12shows the procedure for class change and number change of station and data terminal.

START

Line Make-Busy

Class change and number change

Line Make-Busy Cancel

END

Refer to Section 6.1.

•For changing class, use ASCL command Note 1

•For changing station number, use ASTN command

Note 2

Refer to Section 6.1.

Note 1: For guest station of Hotel System, use AGCL command.

Note 2: For guest station of Hotel System, use AGSN command.

Figure 6-12 Class Change and Number Change of Station and Data Terminal Procedure

6.3Make-Busy/Make-Busy Cancel of C.O. Line/Tie Line

Figure 6-13shows the procedure to make-busy/make-busy cancel of C.O. line/tie line.

START

Make-Busy/Make-Busy Cancel of C.O./Tie Line

•For make-busy/make-busy cancel by line basis MBLE command

•For make-busy/make-busy cancel by route basis MBRT command

•For make-busy/make-busy cancel by each circuit card MBPM commands or MB (toggle) switch setting on the circuit card

END

Figure 6-13 Make-Busy/Make-Busy Cancel of C.O. Line/Tie Line Procedure

CHAPTER 6 NDA-24300

Page 402

Issue 1