NEC NDA-24300 Cadsd Continuous Assignment of Station Data, Example Input data, STNEND=200, Result

CADSD: Continuous Assignment of Station Data

CADSD: Continuous Assignment of Station Data

1.Functional Outline

This command can assign/delete many station data simultaneously which have consecutive numbers.

2.Parameters

Input Data

Type: Assign/Delete

[When Assign is selected in the Type selection list box]
TN(START):	Start Tenant Number
TN(END):	End Tenant Number
STN(START):	Start Station Number [Max. 6 digits]	Note 1
STN(END):	End Station Number [Max. 6 digits]	Note 1
STEP:	Station Count-up Step	Note 2
	If using * and # → [1-12]
	If not using * and # → [1-10]
LENS(START):	First Line Equipment Number [6 digits]
LENS(END):	Last Line Equipment Number [6 digits]
GROUP(START):	First Group Number [0-31]
GROUP(END):	Last Group Number [0-31]
LEVEL(START):	First Level Number [0-7]
LEVEL(END):	Last Level Number [0-7]

Note 1: In the bottom part of the display, a check box is provided to determine whether to use "*" and "#" as a part of the Station Number. If necessary, check the box.

Note 2: In the parameter here, specify the size of increment between the consecutive station numbers to be assigned. See the example below:

Example:	Input data
	STN(START)=100
	STN(END)=200
	STEP=10

Result

Station Number is assigned by 10 increments:

→∇ When * and # are not used as part of STN

100 110 120 130 ... 190 200

∇When * and # are used as part of STN 10* 118 126 134 ... 1** 1#8

NDA-24300CHAPTER 8

Page 527

Issue 1