NEC NDA-24300 manual Dcbd Display of Call Block Entry Data

DCBD: Display of Call Block Entry Data

DCBD: Display of Call Block Entry Data

1.Functional Outline

This command is used to display the following Call Block data, assigned to a station:

•Number of station/trunk whose call is to be blocked (in the remainder of this page, denoted as “Restriction Number”)

•Registered “Restriction Numbers” in total

These data can be obtained by entering any of the station’s Telephone Number (TYPE 1), Physical Station Number (TYPE 2) or LENS (TYPE 3) in the parameters below:

2.Parameters

Input Data

TYPE: Selection of Input Data Type

TYPE 1	(Input Data = UGN, TELN)	Note
TYPE 2	(Input Data = FPC, TN, STN)	Note
TYPE 3	(Input Data = FPC, LENS)	Note

READ (button to view the Display Data)

EXIT (button to exit)

Note: When using this command, first choose the input data type (Type 1 - 3) in the “TYPE” selection list box. Then the following parameters appear, according to the selected data type.

•	When TYPE 1 is selected	: UGN	(User Group Number)
		TELN	(Telephone Number [Max.16 digits])
•	When TYPE 2 is selected	: FPC	(Fusion Point Code [1-253])
		TN	(Tenant Number [Max.3 digits])
		STN	(Physical Station Number [Max.6 digits])
•	When TYPE 3 is selected	: FPC	(Fusion Point Code [1-253])
		LENS	(Line Equipment Number)

CHAPTER 8 NDA-24300

Page 548

Issue 1