NEC NDA-24300 manual System Data KEY Load, DSP of active CPU Is ON. on Line

SYSTEM OPERATIONS

Table 6-13 System Initialization With Office Data Loading From HD [Procedure #2]

ACTION			7SEG LED/OPE LAMP/KEY
			SETTINGS
			CPU OPE lamp on the DSP of
START			active CPU lights steadily green.
			IMG0-3 lamps flash.
Confirm system is operating normally.
			IMG0 lamp on the DSP of mate
Turn ON the EFFECT key on the TOPU. (See Figure 6-58)
			CPU flashes green.
Set the keys on the TOPU as follows.			SYSTEM DATA
• PROGRAM KEY	→	NON LOAD	PROGRM
			NON LOAD
• SYSTEM DATA KEY	→	LOAD	LOAD	LOAD
			NON LOAD
			PZ-DK222
Press INITIAL START button on the TOPU.			CPU OPE and IMGX lamps on
			both DSP go OFF.
		• HD Initialization	STATUS LED (right) on
			the DSP of CPU is ON.
		• Office Data Load	STATUS LED (right) on
		• System Initialization	the DSP of CPU is ON.
			STATUS LED (right) on
			the DSP of active CPU
			is ON.
		• System starts up again.
			CPU OPE lamp on the DSP of
			active CPU lights steadily green.
			IMG0-3 lamps flash.
			IMG0 lamp on the DSP of mate
			CPU flashes green.
			STATUS LED (right) on
	END		the DSP of active CPU
			is ON. (ON LINE)

CHAPTER 6 NDA-24300

Page 480

Issue 1