NEC NDA-24300 manual Return MB switch to, Previous position after, MB lamp has turned on

SYSTEM OPERATIONS

12.2.6Peripheral Equipment Initialization (Line/Trunk Initialization)

Line/trunk initialization can be divided into two types: initialization on an indi- vidual channel basis and initialization on a circuit card basis. Follow the proce- dure in Table 6-19.

ATTENTION

Contents Static Sensitive

Handling Precautions Required

Table 6-19 Line/Trunk Initialization Procedure

	ACTION		REMARKS
START			Note: When initializa-
			tion executes on a
			circuit card basis, all
			channels on the cir-
			cuit card are placed
Is initialization on		Circuit card basis	into make-busy state.
individual channel basis or on
circuit card basis?

Individual channel basis

Use RLST command.

Turn the MB switch UP on

(Refer to Chapter 8)

the circuit card.

END	Return MB switch to the
	previous position after the
	MB lamp has turned ON.
	END

CHAPTER 6 NDA-24300

Page 486

Issue 1