JVC RX-730RBK manual About the speaker impedance of the speakers, 16 ohm

About the speaker impedance of the speakers

CAUTION:

When connecting speakers, use speakers with the SPEAKER IMPEDANCE indicated by the speaker terminals.

Notes:

•The required speaker impedance of the front speakers does not differ depending on whether both the FRONT SPEAKERS 1 and FRONT SPEAKERS 2 terminals are used or only one of them is used.

•The required speaker impedance of the front speakers differs depending on whether or not a center and/ or rear speakers are connected at the same time. Since there are four possible speaker connections with the receiver, check which one fits your case and use the speaker with the impedance described below.

English

CASE 1 When you connect only front speakers

Front	Front
Speaker	Speaker

CASE 2 When you connect front speakers and a center speaker

Front		Front
Speaker	Center Speaker	Speaker

Use front speakers with 4 — 16 ohm impedance.	Use the following speakers;
	• Front speakers: 8 — 16 ohm	impedance
	• Center speaker: 8 — 16 ohm	impedance

CASE 3 When you connect front and rear speakers

Front	Front
Speaker	Speaker

Rear	Rear
Speaker	Speaker

Use the following speakers;
•	Front speakers:	8 — 16 ohm	impedance
•	Rear speakers:	8 — 16 ohm	impedance

CASE 4 When you connect front and rear speakers as well as a center speaker

Front		Front
Speaker	Center Speaker	Speaker

Rear	Rear
Speaker	Speaker

Use the following speakers;
• Front speakers:	8	— 16 ohm	impedance
• Rear speakers:	8	— 16 ohm	impedance
• Center speaker: 8		— 16 ohm	impedance

Page 8