JVC RX-730RBK manual Simplifying the Operations Using the Remote Control

English

Simplifying the Operations Using the Remote Control

You can program and store a series of operations in a specific order you want. After making a program, you can perform these programed operations at a press of the SEQUENTIAL PROGRAM KEY.

Programing a series of operations

LEARN CANCEL

Remote: Inside

SEQUENTIAL PROGRAM KEY

You can make 3 different programs, each containing up to 16 steps.

1Open the outside panel of the remote control.

2Press LEARN so that the SEND/LEARN indicator lights up (green).

Lights

SEND/LEARN ERROR

3Close the outside panel.

4Press SEQUENTIAL PROGRAM KEY A, B, or C to which you want to assign a program you are making from now.

A	B	C	The SEND/LEARN indicator starts flashing.
			Flashes	ERROR
			SEND/LEARN

Remote: Outside	Note:
	If the ERROR indicator lights up (red) while the SEND/LEARN indicator is flashing, you have already
	assigned a program to that SEQUENTIAL PROGRAM KEY. To add steps to the program, continue to step
	5. If you do not want to change it, press another SEQUENTIAL PROGRAM KEY after the SEND/LEARN
	indicator stops flashing.

5While the SEND/LEARN indicator is flashing, press the button you want to store as the first step of the program.

Both the SEND/LEARN and ERROR indicators light up, and then only the ERROR indicator goes off.

	SEND/LEARN	ERROR
Lights			Lights
	SEND/LEARN
		ERROR

Lights

SEND/LEARN ERROR

When the SEND/LEARN indicator goes off and starts flashing again, the first step is stored.

The ERROR indicator lights up while the SEND/LEARN indicator is flashing.

SEND/LEARN ERROR

Flashes Lights

SEND/LEARN ERROR

Note:

If the SEND/LEARN indicator stops flashing before you press the button, repeat from step 4 again.

Page 45