JVC RX-730RBK manual Connecting the rear and center speakers, Connecting the subwoofer speaker

English

Connecting the rear and center speakers

Cut, twist and remove the insulation at the end of each speaker signal cable first, and then, connect rear speakers to the REAR SPEAKERS terminals and a center speaker to the CENTER SPEAKER terminals by using the cables.

		1 Open the terminal and
			then insert the speaker
			signal cable.
	CENTER	REAR
	SPEAKER	SPEAKERS
	RIGHT	LEFT
Center Speaker
Left Rear Speaker	Right Rear Speaker	2	Close the terminal.

Notes:

•You can register the center speaker size after you finish its connection. If you register it, you do not have to set the center speaker mode when setting the surround mode.

(If you do not use a center speaker, register that information.) See page 17.

•When you connect rear speakers, make sure that both left and right speakers are connected; otherwise, no sound will come out of the rear speakers.

Connecting the subwoofer speaker

You can enhance the bass by connecting a subwoofer.

Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cable with RCA pin plugs.

SUBWOOFER

OUT

Powered subwoofer

Page 7