See also page 39.
MENU
Assigning Names to Preset Stations
You can assign a name of up to five characters to each preset station (from preset channel number 1 to 20). When a preset station is tuned in, its assigned name will appear on the display.
On the front panel only:
1.Tune in a preset station (preset channel number 1 to 20). See page 21 for details.
2. Press MEMORY (next to the TUNER button).
TUNER | MEMORY | The preset channel number starts flashing. |
|
|
|
|
|
| |
|
| CH– |
|
|
|
| Note: |
|
|
|
| If you press Control %/ Þwhile the preset channel |
|
|
|
| number is flashing, you can change the preset channel | 1k | 10k VISUAL CONFIRMATION |
|
| 100 |
number.
3. Press Control # (or @) until the first character position starts flashing.
CH–
100 | 1k | 10k VISUAL CONFIRMATION |
4. Press Control % / Þto select a character.
You can use characters listed below.
CH–
100 | 1k | 10k VISUAL CONFIRMATION |
5. When a character you want appears, press Control #(or @).
The next (or previous) character position starts | CH– |
flashing.
100 | 1k | 10k VISUAL CONFIRMATION |
6. Repeat steps 4 and 5 to enter up to five characters.
| 7. Press MEMORY (next to the TUNER button) again while the last selected character is flashing, | |
TUNER | MEMORY | |
|
| after you have assigned a name. |
|
| To erase the input characters |
Front panel | Insert blanks using the same procedure described above. | |
|
| |
Available characters |
|
|
|
| |
Blank |
|
|
|
|
|
| A B C D E F G H I J K L M N O | ||||
P Q R S T | U V W X Y Z 0 1 2 3 4 | ||||
5 | 6 | 7 | 8 | 9 |
|
Page 22
English
