English
Specifications
Amplifier
Output Power | At Stereo operation |
|
| Front Channels | 80 watts per channel, min. RMS, both channels driven into 4 |
|
| ohms at 1 kHz with no more than 0.9% total harmonic distortion. |
|
| |
|
| 70 watts per channel, min. RMS, both channels driven into 8 |
|
| ohms at 1 kHz with no more than 0.9% total harmonic distortion. |
|
| |
|
| 65 watts per channel, min. RMS, both channels driven into 8 |
|
| ohms, 20 Hz to 20 kHz with no more than 0.06% total harmonic |
|
| distortion. |
| At Surround operation |
|
| Front Channels | 70 watts per channel, min. RMS, driven into 8 ohms at 1 kHz with |
|
| no more than 0.7% total harmonic distortion. |
| Center Channel | 70 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more |
|
| than 0.7% total harmonic distortion. |
| Rear Channels | 70 watts per channel, min. RMS, driven into 8 ohms at 1 kHz, |
|
| with no more than 0.7% total harmonic distortion. |
Total Harmonic Distortion |
| 0.06 %* at 65 watts output |
(8 ohms, 1 kHz) |
| (* Measured by JVC Audio Analysis System) |
Audio Input Sensitivity/ | PHONO (MM) | 2.5 mV/47 k ohms |
Impedance (1 kHz) | CD, VCR, VIDEO1, VIDEO2, | 230 mV/47 k ohms |
| TV SOUND, TAPE |
|
Audio Output Level | TAPE, VCR | 230 mV |
PHONO | 70 dB/66 dB | |
(’66 IHF/DIN) | CD, VCR, VIDEO1, VIDEO2, | 87 dB/67 dB |
| TV SOUND, TAPE |
|
Frequency Response (8 ohms) | PHONO | 20 Hz to 20 kHz (±1 dB) |
| CD, VCR, VIDEO1, VIDEO2, | 20 Hz to 20 kHz (±1 dB) |
| TV SOUND, TAPE |
|
RIAA Phono Equalization |
| ±0.5 dB (20 Hz to 20 kHz) |
Loudness Control |
| +6 ±1 dB at 100 Hz |
(Volume Control at |
| +4 ±1 dB at 10 kHz |
S.E.A. | Center Frequencies | 100 Hz, 1 kHz, 10 kHz |
| Control Range | ±10 dB ±2 dB |
|
|
|
Video |
|
|
Video Input Sensitivity/Impedance | VCR, VIDEO1, VIDEO2 | 1 |
Video Output Level | VCR, MONITOR OUT | 1 |
Synchronization |
| Negative |
| 45 dB | |
| PAL |
Page 51