JVC RX-730RBK Delay, DELAY 1 DELAY DELAY 4 DELAY, English, PROLOGIC 3CHLOGIC HALL SURR OFF

SURROUND

ADJUST

Front panel

SURROUND

MODE

Remote: Outside

SOUND

CONTROL

–REAR +

7/P 8

DELAY

2

Remote: Inside

3.Press SURROUND ADJUST so that the Control % / Þ/ @/ # buttons work for surround settings.

The lamp next to the button lights up.

4.Press Control %/ Þ until “– REAR +” appears on the display.

5.Press Control @/ # to adjust the rear speaker output level.

•Pressing Control @decreases the output level up to –10 dB.

•Pressing Control #increases the output level up to +10 dB.

6.Press Control % / Þ until “–DELAY +” appears on the display.

7.Press Control @/ # to adjust the delay time of the rear speaker output. Each time you press the button, the delay time changes as follows:

DELAY 1 DELAY 2

		DELAY 4	DELAY 3
DELAY 1	Select this when the distance from you to your rear speakers is greater than that to the front
	speakers.
DELAY 2	Select this when the distance from you to your rear speakers is almost equal to that to the
	front speakers.
DELAY 3	Select this when the distance from you to your rear speakers is a little less than that to the
	front speakers.
DELAY 4	Select this when the distance from you to your rear speakers is much less than that to the
	front speakers.

To cancel the Hall surround, press Control %/ Þuntil “SURR OFF” appears in step 2. The HALL and SURROUND indicators go off.

From the remote control:

1.Press SURROUND MODE repeatedly until “HALL” appears on the display. The HALL and SURROUND indicators also light up on the display.

Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):

PROLOGIC 3CHLOGIC HALL

SURR OFF

(Surround Off)

2.Open the outside panel and press SOUND CONTROL on the remote mode section.

3.Press REAR +/– to adjust the rear speaker output level.

•Pressing REAR –decreases the output level up to –10 dB.

•Pressing REAR + increases the output level up to +10 dB.

4.Press DELAY to adjust the delay time.

Each time you press the button, the delay time changes as follows:

DELAY 1 DELAY 2

DELAY 4 DELAY 3

To cancel the Hall Surround, press SURROUND MODE until “SURR OFF” appears on the display. The HALL and SURROUND indicators go off.

English

Page 30