JVC RX-730RBK manual Connecting the Speakers, Connecting the front speakers

Connecting the Speakers

You can connect the following speakers:

•Two pairs of front speakers to produce normal stereo sound.

•One pair of rear speakers to enjoy the surround effect.

•One center speaker to produce more effective surround effect (to emphasize human voices).

•One subwoofer to enhance the bass.

For each speaker (except for subwoofer), connect the black (–) and red (+) terminals on the rear panel to the black (–) and red (+) terminals marked on the speakers. For connecting a subwoofer, see page 7.

CAUTION:

When connecting speakers, use speakers with the SPEAKER IMPEDANCE indicated by the speaker terminals.

Connecting the front speakers

Cut, twist and remove the insulation at the end of each speaker signal cable first, and then, connect the front speakers to the FRONT SPEAKERS terminals by using the cables.

You can connect two pairs of front speakers (one pair to the FRONT SPEAKERS 1 terminals, and another pair to the FRONT SPEAKERS 2 terminals).

English

FRONT SPEAKERS

RIGHT	LEFT
1

			+	–	–
	Left	Right	2
	Speaker	Speaker
			RIGHT		LEFT
1 Turn the knob	2	Insert the speaker	3 Turn the knob
counterclockwise.		signal cable.	clockwise.
1		1	1
RIGHT		RIGHT	RIGHT

1

+

2

Page 6