Preparing for Dolby Surround
See also page 40.
MENU
English
SURROUND MODE
Front panel
SURROUND
ADJUST
Front panel
The receiver memorizes two sets of Dolby Surround adjustments; one for Pro Logic and the other for 3ch Logic.
On the front panel:
1.Press SURROUND MODE so that the Control % / Þbuttons work for selecting the surround modes.
The lamp next to the button lights up.
2.Press Control %/ Þ until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.
The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up. Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):
PROLOGIC 
3CHLOGIC 
HALL 
|
|
| SURR OFF |
|
|
|
|
|
| ||
|
|
| (Surround Off) | ||
|
| ||||
PROLOGIC | Select this mode to watch a video source with Dolby Surround when you have | ||||
|
| connected the rear speakers (and a center speaker). | |||
|
|
|
|
|
|
3CHLOGIC | Select this mode to watch a video source with Dolby Surround when you have | ||||
|
| connected a center speaker and no rear speakers. | |||
HALL | This is JVC’s original surround mode, and is different from Dolby Surround. To use | ||||
|
| this, see page 29. | |||
|
| ||||
SURR OFF | No surround mode is applied. | ||||
|
|
|
|
|
|
3.Press SURROUND ADJUST so that the Control % / Þ/ @/ # buttons work for adjusting the surround mode.
The lamp next to the button lights up.
4.Press Control %/ Þ until “CNT MODE” (Center Mode) appears on the display.
5.Press Control @/ # to select the center mode.
Each time you press the button, the center modes change as follows:
WIDE
NORMAL
PHANTOM
OFF 
WIDE | Select this mode when the center speaker can reproduce the bass better than the |
| front speakers. All signals of the center channel are output through the center |
| speaker. |
|
|
NORMAL | Select this mode when the center speaker cannot reproduce the bass better than |
| the front speakers. The bass portions of the center channel signals are output |
| through the front speakers. |
|
|
PHANTOM | Select this mode when you do not use a center speaker. The center speaker channel |
| signals are output through the front speakers. |
|
|
OFF | Select this mode to turn off the center speaker channel. |
|
|
Notes:
•If you have already set the “center speaker size” following the procedure described on page 17, you do not have to select the center mode in this procedure.
•When you have selected “3CHLOGIC,” you cannot select “PHANTOM.”
Continued to the next page
Page 32
