SELECTING TEMPERATURE DISPLAY MODE
1.Press MENU. Then press e or d until TEMPERATURE appears.
2.Press g. The current temperature reading flashes.
3.Press e or d to select the desired temperature display mode (°F or °C).
4.Press g to confirm the setting. Press MENU to exit. Ô
SELECTING A CHANNEL
1.Press MENU. Then press e or d until SELECT CH appears.
2.Press g. Ô
3.To automatically search for channels, press g when AUTO appears. CHANNEL and SEARCHING …
appear. If there is an available channel, CHANNEL, and the number of the currently selected channels, and AVAILABLE appear. If there is no available channel, NO CHANNEL,
AVAILABLE, BACK TO CHANNEL, and the number of the last selected
Ô NOTE Ô
Selecting
Temperature
Display Mode
The current temperature is updated about every 30 seconds.
Selecting a Channel
•If Auto mode was
selected previously, AUTO appears. If
Manual mode was
selected previously, MANUAL appears.
•During manual channel selection, the weather broadcast turns on so that you can verify a station exists on the selected channel.
•The Weatheradio automatically searches for and tunes to the strongest weather broadcast channel in your area if you select AUTO.
Programming the Weatheradio‚
9
