Preparation
Ô NOTE Ô
The backlight is on when receiving an alert message, or for any key operation.
USING AC POWER
Your Weatheradio can also use 6V, 300mA AC/DC adapter with plug size H (not supplied) for normal operation. With AC connected, normal operation is allowed even if there are batteries in unit.
1.Open the rubber DC 6V jack cover.
2.Insert the AC/DC adapter’s barrel plug into DC 6V jack. Then plug the adapter into a standard AC outlet.
POWER UP RESET
When powered on for the first time after installing batteries, all LCD segments turn on for one second. The device starts to search for the best (strongest) weather channel. Reset the Weatheradio to default settings by following the steps below.Ô
1.Remove the batteries and/or disconnect AC power.
2.Hold down WX and
batteries or reconnect to AC power. Hold down WX until USER SETUP appears and a short beep sounds.
4
