Samsung HT-DB1650 not work, changed, broadcast, picture is produced, Audio language and, Symptom

Symptom Check/Remedy

• Disc is rotating but no	• Is the TV power on?
picture is produced.	• Are the video cables connected properly?
• Picture quality is poor	• Make sure that the disc is not a PAL- disc.
	• Is the disc dirty or damaged?
and picture is shaking.	• A poorly manufactured disc may not be playable.

•Is the remote control being operated within its operation range of

The remote control does	angle and distance?
	• Are the batteries exhausted?
not work.
	• Have you select the mode(TV/DVD) functions of the remote
	control (TV or DVD) correctly?
Audio language and	• Audio language and subtitles will not work for DVDs not containing
	them. And depending on the disc, they may work differently.
Menu screen does not appear even	• Are you using a disc that does not contain menus?
when the menu function is selected.
Aspect ratio cannot be	• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
changed.	mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
	ratio only. Refer to the DVD disc jacket and then select the
	appropriate function.
Can't receive radio	• Is the antenna connected properly?
broadcast.	• If the antennas input signal is weak, install an external FM antenna
	in an area with good reception.
• The main unit is not working.
	• Turn off the power and hold the	button on the main unit for
(Example: The power goes out or
	longer than 5 seconds.
strange noise is heard.)	Using the RESET function will erase all stored settings.
• The DVD player is not
	Do not use this unless necessary.
working normally.

•While “NO DISC” message appears on the display of main unit, hold

The password for rating	the main unit's	button for longer than 5 seconds.“INITIAL”
	appears on the display and all settings will return to the default values.
level has been forgotten.	• Press the POWER button.
	Using the RESET function will erase all stored settings.
	Do not use this unless necessary.

MISCELLANEOUS

62